READY TO SHIP | RNVG

AB NightVision Inc. and Night Vision Inc. are proud to announce the release of the Ruggedized Night Vision Goggle (RNVG). The RNVG is an extremely tough, full featured night vision binocular. Any user familiar with PVS-14 goggles will find the controls to be intuitive.

The RNVG utilizes a single CR123 battery, and comes with an auxiliary power connector for use with ANVIS-style auxiliary battery packs, such as our Night Vision Inc. Battle Battery Pack.

The switch and focusing functions are identical to the PVS-14. The switch has 3 positions: Off, On, and On with IR illuminator. Like the PVS-14, the switch does not cut power to the tubes when changing positions to turn the IR illuminator on. The RNVG has IR signaling capability, and as a safety feature the switch knob must be pulled out to turn the IR illuminator on. An IR spot/flood adapter can also be used if the user desires more range from their IR illuminator.

The mil-spec objectives allow the user to focus between 9.8 inches and infinity, while the mil-spec eyepieces offer a diopter adjustment range of -6 to +2.  The inter-pupillary distance is adjustable to match the users eye spacing from 51mm to 73mm.  IP adjustment is accomplished with jackscrews that maintain user settings using a ball-detent method to prevent any changes due to vibration.

The RNVG was designed from the ground-up to be extremely tough. When a night vision binocular is dropped and broken, it will most likely fail at the joint between the optical pods and the bridge.  However, both the optical pods and bridge on the RNVG are CNC machined from solid billet 7075 aluminum to prevent breakage. This material is 36% stronger than most common steel, making the RNVG the most rugged night vision goggle in production. Careful design combined with advanced machining techniques has kept the weight down to a very competitive level. The RNVG weighs in at 555 grams, without a battery installed.

The RNVG is available in BLACK, TAN, FDE, and OD. The components of the binocular are media blasted to give a non-reflective matte finish, then black anodized for durability. For the TAN, FDE, or OD options, Cerakote (a proven firearms finish) is applied over the anodizing to give a tough, attractive finish.